Page 6
OPERATING INSTRUCTIONS
1. Make sure that the trigger is locked.
2. Place the fogger on a level surface when preheating.
3. Using a proper gauge extension cord, plug the fogger into a convenient outlet.
Allow the fogger to preheat for 2 or 3 minutes. While preheating some insecticide
or small clouds of smoke may come out of the nozzle. This is normal and should
not be cause for concern.
4. Release trigger by pushing trigger lock to the left and fogger is ready to operate.
5. Squeeze trigger every 3 to 4 seconds to achieve a steady cloud of whitish-grey
colored fog.
6. If unit becomes excessively hard to pump, you are pumping too fast. Too frequent
pumping results in wet fog.
7. If cloud becomes excessively blue/brown in color then you are pumping too slow.
This could degrade the insecticide and make it less eff ective.
8. If a fl ame appears at the end of the nozzle, stop pumping immediately, and
unplug fogger. Place fogger on a stable, non combustible surface. Flame will stop
after excess insecticide is eliminated.
9.
CAUTION:
The shroud will become very hot while in operation. Do not let it come
into contact with skin, clothing or any combustible material. Always carry the
fogger at your side, pointed at a slightly downward angle.
10. Never leave fogger plugged in while not in use.
NOTE:
Proper use of this fogger increases the penetrating ability of the insecticide and
allows the fog to cover a larger area. Improper use could result in oily residue left
behind which may be harmful to certain species of fl owers and growing plants.
Improper use will shorten the life of your new electric fogger.
