2
Carefully remove and lay out all hardware and parts. Check quantities and match the Hardware List and the Parts List.
NOTE: During
the assembly process whenever using screws or bolts, check each with the Hardware List by letter and size identification. Place
each screw or bolt on the diagram of the item which is sketched actual size. Be sure to use the proper size specified in the
assembly directions.
If any parts are missing or broken or you need assistance with assembly, DO NOT return the product to your
dealer. Call Foundations
®
for assistance at 1 877.716.2757 (U.S. Only) or +1 330.722.5033 (Monday through Friday, 9:00 a.m.– 4:00 p.m.
Eastern Time). Before making this contact identify your Crib’n’Double Bed by the model identification number stamped on the inside face
or bottom edge of the Headboard, Footboard or crib sides. Make note of all identification numbers and include this information with your
request.
DO NOT SUBSTITUTE PARTS!
Record your model identification number here for future identification:
Model #______________________________________
P
reParatioN
NOTE: Assembly may be easier if all parts shown are laid on a soft surface. Attach posts exactly as shown.
NOTE:
Dowels located in each end of top rail of Stationary Side
R
will be inserted into locator holes in Stationary Posts
N
&
O
. Attach
Stationary Posts
N
&
O
to Stationary Side
R
by inserting Allenhead Bolts
F
through their locator holes in Stationary Posts
N
&
O
. Insert
a Joint Connector Nut
H
into holes in the bottom edge of the top and bottom rails of Stationary Side
R
. Using a slotted screwdriver, align
the thread on Joint Connector Nut
H
with the threads on Allenhead Bolt
F
.
See D
etail
A.
Hold Joint Connector Nut
H
in position with
a slotted screwdriver and tighten Allenhead Bolt
F
using Allen Wrench
A
. Tighten Securely. Place Stationary Top Cap
J
on top of
Stationary Side sub assembly. Insert Allenhead Bolts
D
up through the locator holes in the bottom edge of Stationary Side
R
top rail and
thread into the factory installed threaded inserts in the bottom of Top Cap Assembly
J
. Tighten Allenhead Bolts
D
securely until the Top
Cap
J
is pulled securely against the top of Stationary Posts
N
&
O
using Allen Wrench
A
.
s
teP
1 - D
iagram
1: a
ssemble
s
tatioNary
s
iDe
F
F
N
O
R
D
J
D
threaded
InS
ert
threaded
InS
ert
threaded
In
S
er
t
threaded
In
S
er
t
A
N
R
F
H
DETAIL A
H
H
H
H
