3.2.3 Movie setting
Use cursor to select “Movie”
ˈ
user can use this selection to turn on or turn off auto play function of
Ǐ
Movie
ǐ
. If user turn on it
ˈ
when user enter
Ǐ
Movie
ǐ
function
ˈ
system will auto play movie.
˗
if
user turn off it, system will enter or
“movie file browse”
to let user browse the movie.
3.3 Display settings
Move the cursor to 3
rd
position to select Display setting:
3.3.1 TVstandard
Use cursor to select “TV Standard”, user can select right standard according to their TV system. There
are “NTSC”, “PAL” & “AUTO” 3 options in all.
3.3.2 AV Output setting:
Use cursor to select “ AV Output” to set TV
-display mode or Panel-display mode.
3.3.3 Display Type setting
Use cursor to select “Display type” to set aspect ratio ,there are “16:9” , “4:3” , “ Auto” 3 options in
all .
3.3.4 Brightness setting
Use cursor to select “Brightness”, user can set the brightness of picture,.
There are “Normal”, “bright”
& “Soft” 3 options in all.
3.3.5 contrast setting
Use cursor to select “Contrast”, user can set the contrast of picture. The range is from
-4 ~ 0 ~ +4, 9
levels in all, the larger the number is, the higher the contrast is.
3.3.6 TFT Brightness setting
Use cursor to select “TFT Brightness”, user can set the brightness of TFT. The range is from
-7 ~ 0 ~
+7, 15 levels in all, the larger the number is, the higher the brightness is.
3.3.7 TFT Contrast setting
Use cursor to select “TFT Contrast”, user can set the contrast of TFT. The range is from
-7 ~ 0 ~ +7,
15 levels in all, the larger the number is, the higher the contrast is.
3.3.8 TFT saturation setting
Use cursor to select “TFT Saturation”, user can set the saturation of TFT. T
he range is from -7 ~ 0 ~
+7, 15 levels in all, the larger the number is, the higher the saturation is.
