8
•
Loose locking screw.
•
Mount the device with the holder on the tripod.
•
Tighten locking screw.
6.2
Mount barndoors
•
Loose fastening screw.
•
Slide the barndoors into the lateral guide rail.
•
Tighten fastening screw.
6.3
Connect to power supply
•
Switch off device.
See
Switch the device on and off
.
•
Compare the local power supply with the connected load of the device.
See
Technical specifications
.
If the values differ, please contact
or tel. 49 84 32 / 9489-0.
•
Connect the power cord with the socket on the device and with the power socket.
7.
Operation of the device
7.1
Adjust tilt angle
•
Open tilt lever.
•
Adjust the required tilt angle.
•
Tighten tilt lever.
7.2
Switch the device on and off, dim it
•
Switch the device on:
Press On/Off switch.
•
The device is ready for operation.
•
Turn the dimmer until the required light power is achieved.
•
The LED light up.
•
Switch off device:
Press On/Off switch.
•
If the lamps were switched on:
The lamps go out.
8.
Transportation and storage
•
Switch off device.
See
Switch the device on and off
.
•
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool down completely.
•
Cover the LED with e.g. bubble wrap and demount the barndoors.
•
Unplug the power cord and power supply unit.
Guide Rail
Holder with Fastening
Screw
