8
7
■
Maintenance
Neutral
Neutral
Graininess Cleanser
Clean Ball
It won’t fire
Possible reasons
Malfunctions
How to solve
Rubber hose bend or stave
Unbend or replace the rubber hose
Gas leak
Rubber hose is chapped or uncorked
Clean it with dry cloth
Forget to open the general gas valve
Close the stove knob and open the
general gas valve, then ignites
There is air mixed in the gas pipe
Ignite repeatedly until the air is
absolutely ducted
Incidentally, there
is red fire
The calcium in the water make the
red fire, don’t worry
Correctly connect and check the
gas tightness in the hose joint
long and short
f l a m e , y e l l o w
flame
clean the firehole and wipe off the
dirt, to make sure the right position
of flame cap
Not cover the flame cap correctly,
there is carbon in the firehole or
being jammed with dirt
Replace a new liquefied gas cylinder
Unstable flame
Run out of the liquefied gas
Ignitor failure or ignition pin electrode
is not in the right place
Safety valve is not opened
Press the knob to the utmost and
turn it to " " position, to make sure
the burner is ignited, and stably press
for 3-6 seconds, then loose the hand
Normal Malfunction and Trouble Shooting
Aculeated Articles (Knife etc.)
5.Please don’t use such aculeated articles as
graininess abluent (putty-powder), clean
ball, knife, etc. to clean the residual
stubborn besmirch in the burners.
Otherwise, it will make the kitchen
countertop go wrong or fray the assembly
surface, then influence stove lifespan.
6.After cleaning, dry them well and install
them correctly.
3.Please use neutral cleanser which is without
corrosiveness, to clean the stainless steel
panel and burner. Never use chlorine-base
cleanser to clean glass.
4.Make sure that there is no carbon in the
firehole, and no jam.
1.Before cleaning, please take down the pan
supports and flame caps.
2. Movable parts of burner like copper flame
cap must be washed with warm water and
neutral cleanser freguently. Remove the
nugget and dry it, then use the stove.
Warm water
Electron spark is weak, battery power
is not enough, loose contact of battery
positive and negative charges or
opposite fix the battery
If the gas stove still can't work after getting rid of the above malfunctions, please
contact FOTILE service center .
Please contact the FOTILE service
center
Please contact the FOTILE service
center to replace the rubber hose
Under a certain climate, the gas is
with much hunmidity.
Replace the battery or refix the
battery
The joint haven’t well connected
with rubber hose or other hoses
The ignition pin electrode and
electrical insulator are not clean and
become damp
GAS STOVE
