ISSUE DATE 10-09-03 REV. DATE 5-24-05 REV. LEVEL: 03 ECN OIPM P/N 3420265 PG 7 OF 16
MINIMUM CLEARANCES TO COMBUSTIBLES
WARNING!
Heaters should be installed so that the minimum clearance to vehicles, as marked on the
heater, will be maintained. If vehicle lifts are present, ensure that the minimum clearance to
combustibles will be maintained from the highest raised vehicle.
•
Dimensions are listed in
inches
•
Dimension “B” indicates
the required clearance to
combustibles; it DOES
NOT indicate the required
mounting height.
Failure to follow these instructions can result in death or injury.
Keep all flammable objects, liquids and vapors the required
minimum distance from the heater.
Burn hazard! Heater is very HOT. Do not touch any part of
heater.
Fire hazard! Some objects will catch fire or explode when placed
close to heater.
END VIEW – 0 DEGREE TILT
END VIEW – 0-45 DEGREE TILT
TOP VIEW
- 2 UNITS SHOWN
C”
6”
B”
6”
24”
FROM A
VERTICAL OR
COMBUSTIBLE
SURFACE
OR
36”
FROM
ANOTHER
HEATER
B”
B”
B” Dimension
2-Lamp units:
-72” for a single unit
-72” for (2) or more
heaters being mounted
end-to-end.
3-Lamp units:
-72” for a single unit
-96” for (2) or more
heaters being mounted
end-to-end.
C” Dimension
TYP. BOTH SIDES AND
ENDS
24”
FROM A VERTICAL OR
COMBUSTIBLE SURFACE
36”
FROM ANOTHER
HEATER
C”
C”
Multiple Heaters may be butted
together on end surfaces
B”
