6
OPTICAL
INPUT
OUTPUT
TDIF-1
OUTPUT
AES/EBU
1:GND
3:COLD
2:HOT
WORD
OUTPUT
INPUT
AC IN
INPUT
2-1
4-3
6-5
8-7
2-1
4-3
6-5
8-7
device supporting the TDIF-1
device supporting the AES/EBU
Between AES/EBU and TDIF-1 devices
To convert AES/EBU signals to a TDIF-1 signal or vice verse, connect devices and set the switches on
the front panel as follows.
To convert a TDIF-1 signal to AES/EBU signals,
set the CLOCK SELECT switch to "TDIF-1".
Set the FORMAT CONVERSION switch to "TDIF-1 <-
-> AES/EBU".
<Fs SELECT switch setting>
You do not have to set the Fs SELECT switch when converting AES/EBU signals to a TDIF-1 signal or vice
verse. The Fs of the converted signals matches the Fs of the source signals.
To convert AES/EBU signals to a TDIF-1 signal,
set the CLOCK SELECT switch to "1-2", "3-4", "5-
6", or "7-8" appropriately according to the connec-
tor to be used. If all eight AES/EBU input channels
are used, you may set any of the four positions
above.
<About WORD clock>
In the connection example above, the UC-8 is locked to an incoming digital signal (TDIF-1 or AES/EBU).
However, if the while system is lock to another WORD clock, feed the master clock to the WORD INPUT of
the UC-8 as well as the other devices. In this case, set the CLOCK SELECT switch to "WORD" and the 75
Ω
TERMINATION to "ON".
ON
OFF
75
Ω
TERMINATION
48kHz
44.1kHz
TDIF-1
AES/EBU
ADAT
WORD
1-2
AES/EBU
LOCKED
POWER
FORMAT CONVERSION
CLOCK SELECT
FS SELECT
TDIF-1
ADAT
7-8
5-6
3-4
ADAT
TDIF-1
AES/EBU
TDIF-1
AES/EBU
ADAT
ADAT
TDIF-1
AES/EBU
WORD
1-2
AES/EBU
LOCKED
TDIF-1
ADAT
7-8
5-6
3-4
WORD
1-2
AES/EBU
LOCKED
TDIF-1
ADAT
7-8
5-6
3-4