■Initial setting (return to factory default) method
Check it in the video
1. First, unplug the USB cable from the cradle.
2. Next, take out the left or right main Unit, hold down the multi-button for 15 seconds and
then release the finger. The LED indicator will blink in blue rapidly.
3. Then, hold the multi-button of the other main Unit for 15 seconds and then release the finger.
The LED indicator will blink in blue as well.
4. Under this condition (left and right LED rapidly blinking in blue), bring the left and right main
Units close by about 2 cm. Both LED indicators will turn off once, and after about 2 seconds,
only the left main Unit LED will flash in red and blue alternately.
5. In this state (Right: off, Left: red and blue fast flashing), place both main Units back to the
cradle with no USB cable connected. Both LED indicators will be off and all information will
reset to the initial state (factory default).
6. After that, when both Units are removed from the cradle, only the left body LED indicator
blinks alternately in blue and red and it will automatically enter the pairing mode.
企
Be careful not to hold the button for more than 15 seconds during pairing operation.
■
Specifications
▼
Bluetooth
• Firmware version: Bluetooth ver. 5.0
• Output class: Class 2
• Communication method: FHSS
• Communication distance: approx.1 Om
• Frequency band: 2.4 GHz (2402 - 2480MHz)
• Corresponding profile:
A2DP1.3, AVRCP1.6, HSP 1.2, HFP 1.7
• Supported codec: AAC, apt-X, SBC
• Supported content protection: SCMS-T
• Transmission frequency range:
20Hz - 20kHz
▼
Audio specifications
(Earphone stand-alone specification)
• Format: Dynamic
• Driver unit
：
cp6mm
• Playback frequency range: 1 OHz-40kHz
• Impedance: 16 ohm
• Dimensions: W21.6 x D14.6 x H6.5mm
▼
Microphone specifications
• Format: MEMS
• Directivity pattern: omnidirectional
/ eve
noise canceling mounted
▼
Remote Controller specifications
• Music playback: play, pause, song feed,
tune backward, cue, crawl, fast forward,
volume adjustment
• Call operation: reception, call cut
▼
Other specifications
• Main unit Dimensions: W40.2 x D48.2 x H 8.8mm
• Mass: 11 g
x
2 (Incl.Cable & Earphone)
• Main unit power supply: DC 3.7 V
Built-in rechargeable lithium-ion battery
• Charging time: approx. 1 h 30min
(full charge)
• Continuous playback/ talk time:
Up to approx. 1 Oh
• Waterproof protection grade: IPX 5
▼
Battery charge cradle specifications
• Input port: USB (type-C)
• Dimensions: Wl 38 x D67 x H35
• Mass: 138g (except TM2 main unit)
▼
Accessories
• USB cable, earpieces (S,M,L: M size installed),
PU leather pouch, sticker, instruction
manual
