3
En
gli
sh
Introduction
Features of PC100USB-HR2
• Volume controller which supports USB input.
• Can remotely control the volume of headphones and speaker systems.
• Compact and robust.
• Can be used as is - no additional cables are required.
• Can be used as an OS standard driver for Windows and Mac OS X.
• Supports maximum 96 kHz/24 bit (PCM) input using a playback application compatible with high
resolution sound or similar.
Accessories
Supplied accessories are listed below. Confirm that these accessories are present after purchase.
• USB cable (AB type/1 m) × 1
• RCA pin cable (1.5 m) × 2
• Owner’s manual (this manual) × 1
Computer requirements
Computers that will be connected to the unit must have the following specifications.
• OS: Windows 7 or above, Mac OS X V10.6 or above
• USB: USB2.0 compatible
Specifications
[OUTPUT] (L/R)
terminals
Connector
RCA pin jack
Adapted load impedance
10 kΩ or more
Standard output level
+6 dBV (0 dBFS)
[PHONES] terminal
Connector
Φ3.5 stereo mini jack
Adapted load impedance
32 Ω or more
Rated output
30 mW + 30 mW
(32 Ω load, THD 0.5% or less)
[USB] terminal
Connector
USB type B connector
Supported sampling frequencies (kHz) 32, 44.1, 48, 88.2, 96
Quantization bit rate
16/24 bit
Power
USB bus power (5 V, 500 mA)
Power consumption
2.5 W maximum
Weight
Approx. 210 g (not including cables)
External dimensions
66 mm (Width) × 44 mm (Height) × 70 mm (Depth)
