![Fostex MR-16HD Скачать руководство пользователя страница 11](http://html.mh-extra.com/html/fostex/mr-16hd/mr-16hd_supplementary-manual_2323893011.webp)
MR16 Supplementary manual
(for the MR16 without a CD-R/RW drive)
<Note>:
If the selected stereo WAV file is larger
than the available disc space of the current CD-
R/RW disc, the following message pops up and
you cannot start writing (you can dismiss the
message by pressing the [MENU/ENTER]
knob). Change the disc to another one with
enough space and carry out the same opera-
tion procedure.
When writing is completed, "
Completed!
" is
shown and the disc access stops.
Now writing in the
Track at once mode is completed
Now writing in the
Disk at once mode is completed
7)
Press the [MENU/ENTER] knob.
The display returns to the USB HOST menu
screen, where "CD Burn " is highlighted.
You can check the TOC information any time
(both before and after finalizing). It is recom-
mended to check the remaining time (the re-
cordable time left) from the TOC information
whenever you write an additional stereo WAV
file (see "Viewing the TOC information" on page
13 for details).
8)
Use the [MENU/ENTER] knob to select
"CD Finalize " and press the [MENU/ENTER]
knob.
The display now shows the confirmation screen
for finalizing, where "
[CANCEL]
" is highlighted.
To cancel finalizing, highlight "
[CANCEL]
" and
press the [MENU/ENTER] knob.
To start finalizing, highlight "
[EXECUTE]
" and
press the [MENU/ENTER] knob.
11
When the disc is burned in the "
Disk at once
"
mode, it is automatically finalized after writing
is completed, and then ejected.
You can check the TOC information if desired.
See "Viewing the TOC information after finaliz-
ing" on page 14 for details.
When the disc is burned in the "
Track at once
"
mode, go to step 8 for finalizing the disc.
If you want to write more than one stereo WAV
file, repeat steps 4 through 6 above, and go to
step 8 for finalizing after writing all the desired
stereo WAV files.
9)
Use the [MENU/ENTER] knob to select
"[EXECUTE]" and press the [MENU/ENTER]
knob.
The display now shows the status of finalizing.
When finalizing is completed, "
Completed
" is
shown and the disc is automatically ejected from
the CD-R/RW drive.