10
Co
nn
ec
tio
n
Connecting output devices
Connect headphones to the headphone terminals [phones] (1/2) on the front panel, or
connect an amplifier or active speaker to the analog output terminal [ANALOG OUT] to
enjoy music. To change the output, use the
output sel
switch on the left side of the front
panel. You can obtain S/PDIF format signals through the square optical terminal [OPTICAL]
or coaxial terminal [COAXIAL] when connecting a digital audio device.
• Do not connect the power cord until all connections are finished.
• The signal is always output from the [DIGITAL OUT] terminal regardless of the "OUTPUT SEL" setting
(
page 11, 13). Digital signal does not output when the input source is set to [ANALOG IN] ("RCA") or a DSD
signal is input.
IN
AC IN
SD CARD
AES/EBU
USB
RIGHT
LEFT
RIGHT
LEFT
ANALOG OUT
ANALOG IN
1
2
OPTICAL
COAXIAL
COAXIAL
OPTICAL
DIGITAL IN
DIGITAL OUT
1
2
Fostex
PM0.5d, etc. (sold separately)
To a digital audio device
RCA cable
Headphones
To an analog amplifier, etc.
To an AC outlet
Optical cable
Coaxial cable
Front panel
(sold separately)
Rear panel
Connecting the power cord
Connect the power cord after all connections are finished.
