Recommended Bass Reflex Type Enclosure
Printed in China
Accessories
Recommended bass
reflex type enclosure is
500L to 800L volume.
The shown drawing’s
bass reflex port is tuned
'Fb' to 16Hz.
Distributor / Authorised Dealer
Fostex Co., 3-2-35 Musashino, Akishima, Tokyo, Japan 196-0021
Tel: +81 (0)42-546-4974 Fax: +81 (0)42-546-9222
www.fostex.jp
In accordance with our policy of continuous development, we reserve the right to change specifications without notice.
CS series film capacitors
High-grade compact capaci-
tors with ø1.6mm copper lead.
CS0.33 (0.33µF)
CS1.5 (1.5µF)
CS0.47 (0.47µF)
CS2.2 (2.2µF)
CS0.68 (0.68µF)
CS3.3 (3.3µF)
CS1.0
(1.0µF)
Tolerance range : +/-5%
Dissipation
: less than 2.5%(@1kHz)
Working Voltage : 240VDC/120VAC
Insulating resist : more than 1000M
Operating temp. : -20º to +60º
Lead length
: more than 70mm
CT series film capacitors
Metallized polyester capaci-
tors with ø0.8mm silver-alloy
copper lead.
CT0.47 (0.47µF)
CT3.3 (3.3µF)
CT0.68 (0.68µF)
CT4.7 (4.7µF)
CT1.0
(1.0µF)
CT6.8 (6.8µF)
CT1.5
(1.5µF)
CT10
(10µF)
CT2.2
(2.2µF)
CT15
(15µF)
Tolerance range : +/-5%
Dissipation
: less than 0.1%(@1kHz)
Working Voltage : 500VDC/200VAC
Insulating resist : more than 1000M
Operating temp. : -20º to +60º
Lead length
: more than 40mm
CP series film capacitors
High cost performance film
capacitors.
L0.18 (0.18mH)
L0.3
(0.3mH)
L0.5
(0.5mH)
L1.0
(1.0mH)
L1.5
(1.5mH)
L1.8
(1.8mH)
L2.2
(2.2mH)
L2.8
(2.8mH)
L3.5
(3.5mH)
LS series air core inductors
High-grade inductors employing
‘Hi-µ core’ with less DC resis-
tance and low distortion.
LS0.15 (0.15mH)
LS0.22 (0.22mH)
LS0.33 (0.33mH)
LS0.47 (0.47mH)
LS0.68 (0.68mH)
LS1.0
(1.0mH)
LS1.5
(1.5mH)
L2.2
(2.2mH)
Grills
K308
8cm, square frame
K312
12cm, square frame
KG810
10cm, square/round frame
KG816
16cm, square/round frame
KG820
20cm, square/round frame
P16 HP sound reflector
HP sound reflector eliminates the standing waves
in enclosure. HP’s 3rd-order curved surface
structure is ideal form and strength to extinguish
naturally the standing waves by making sound
reflected diffusely.
P-30 brass tweeter stand
P-30 is the tweeter stand made of brass,
which minimizes unwanted resonance
and improves high frequency sound.
CP1.0
(1.0µF)
CP6.8 (6.8µF)
CP1.5
(1.5µF)
CP10
(10µF)
CP2.2
(2.2µF)
CP15
(15µF)
CP3.3
(3.3µF)
CP20
(20µF)
CP4.7
(4.7µF)
Tolerance range : +10%/-5%
Dissipation
: less than 0.2%
Working Voltage : 250VAC
Insulating resist : more than 2000M
Operating temp. : -25º to +85º
Lead length
: more than 105mm
L series air core inductors
Conventional type air core
inductors with less DC
resistance.
Attenuators
High-input resistant attenuator-
R80B, and coaxial version-
R82B. 1dB step level adjustable
high-grade trans-type, R100T.
300
ø120
855
300
940
1510
1594
1024
ø7
50
42
200
660
744
ø120
