Fostex DV-824, Руководство пользователя

Страница: 53 / 162

53
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
4) By pressing the [ REWIND] key while holding down the [STOP/HOME] key,
the unit locates to the beginning of the recorded file ("Locate ABS 0" function).
Pressing the [PLAY] key starts playback of the recorded audio file from the
beginning.
See page 59 for details about playback.
<Note>: If you do not make the next recording after the first recording ends,
press the [SAFE/READY] key to exit the record ready mode (i.e. to turn of the
indicator).
<Tip>
During recording, you can set cue points which can be used as markers (
see
page 56 for details
).
You can also record the slate tone at the beginning of the audio file (
see page
55 for details
).
From the Home screen above left, you can see that the "SCENE_001.wav" audio
file has been created and the next file name is "SCENE_002.wav".
In the "REP.F" field, you can see the FS and bit length of the recorded file.
<Tip>
You can also use the "Pre recording" function which prevents missing the start
of a take (
see page 54 for details
).
3) To stop recording, press the [STOP/HOME] key.
When recording ends, the Home screen changes as shown below left. By pressing
the [SAFE/RDY] key to exit the record ready mode, the file name and disk
remaining time are dismissed from the Home screen as shown below right.
<Tip>
If recording was not successful, you can cancel it. See "Canceling recording"
on the next page.