20
Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip con-
trol.
Setting the time on the Electronic Clock
When the oven is connected to the power sup-
ply, the indication 00:00 flash on the display.
Press
–
or
+
to set the time on the clock. The
clock beeps twice to confirm the selected
time.
If you wish to modify the time, press
–
or
+
until the current time flash on the screen.
Press
OK
. Then press
–
or
+
to modify the
time. The clock beeps twice to confirm the
modification.
Manual Operation
The oven is ready to be used when the clock
has been set. Select a cooking function and a
temperature.
When you begin cooking, symbol
lights up
to indicate that the oven is heating the con-
tents; the symbol
goes out when the
selected temperature is reached.
Set the controls to
to turn the oven off.
Functions of the Electronic Clock
Alarm:
Creates an alarm signal when the peri-
od of time finishes; the oven does not need to
be in use in order to use this function.
Cooking Time:
To cook for a selected length of
time; the oven turns itself off automatically
when the time finishes.
End Cooking Time:
To cook until a set time;
the oven turns itself off automatically when
the time finishes.
Cooking time and End Cooking Time:
To cook
for a selected length of time and end at a set
time. When this function is set, the oven
comes on automatically at the time required
in order to cook for the set length of time
(Cooking time) and end automatically at the
indicated time (End Cooking Time)
Programming the Alarm
1
Press
+
until symbol
lights up. Press
OK
.
2
Set the period of time after which you wish
the alarm to sound by pressing
–
or
+
.
3
The clock beeps twice, the current time is
displayed and symbol
lights up perma-
nently to indicate that the alarm has been
set.
4
When the set period of time comes to an
end, the alarm sounds and symbol
starts
to flash.
5
Press any button to stop the alarm; symbol
goes out.
You can consult the remaining time at any
moment by pressing
–
or
+
until symbol
flashes and then pressing
OK
. You can also
modify the set time at this point by pressing
–
or
+
. The clock beeps twice to confirm the
change.
If you wish the remaining time to be displayed
until the end of the set period of time, press
–
or
+
until symbol
flashes and then press
OK
and keep it pressed in. Symbol
flashes.
Keep
OK
pressed in again to return to the real
time.
Using the Oven
