8
www.fosterrefrigerator.com
Start-Up and Test Sequence
After unpacking, clean (cleaning directions supplied within this manual) and allow the appliance to stand for
60 minutes before turning on.
Ensure the appliance is situated on a firm, level surface,
away from both hot and cold air sources, as this will
affect its performance.
Place the appliance in a location so as not to exceed
the maximum rated ambient temperature.
The appliance produces warm air when operating
normally and requires adequate ventilation. The
dimensions indicated are a minimum.
As the operating temperature has been pre-set no adjustments are required. Allow the appliance
to reach its normal operating temperature before loading with product.
Connect the appliance to a suitable
power supply. Do not connect or
disconnect the appliance with wet
hands. The appliance will turn on
automatically displaying the actual
internal temperature of the appliance. If
this does not happen and button 3 is
‘pulsing’ press and hold button 3 for 3
seconds to turn on the appliance.
50mm
50mm
