Fosi Audio ZK-1002T, Руководство пользователя

Страница: 11 / 24

Product Parameters
1: ZK-502C Stereo Bluetooth Power Amplifier Module * 1
2: Acrylic shell * 2
3: 12mm Copper column * 4
4: 9mm Screw * 8
5: Steel nut, screw mat * 1
6: 20cm power cable * 1
7: Screwdriver * 1
8: Knob * 1
9: Heat sink * 1
Installa�on
Step1
- Install the bo�om acrylic shell
Use the screwdriver to install the bo�om 4 counts 9mm screw to connect the copper
column, amplifier board, and bo�om acrylic shell.
Step2
- Install the heat sink
Paste the heat sink to the chip posi�on of the Bluetooth amplifier board.
Step3
- Install the top acrylic shell
Use the screwdriver to install the top 4 counts 9mm screw to connect the copper
column and the top acrylic shell.
Step4 - Install steel nut, screw mat, and knob
1: Install the steel nut;
2: Install the screw mat;
3: Install the volume knob:
Adjust the volume switch in the OFF posi�on.
Then insert the volume knob un�l it fits perfectly with the steel nut.
Note: There is a volume mark, you need to put the volume mark in the six o'clock
posi�on to insert the volume knob.
09