Fosi Audio TB10A, Руководство пользователя, Страница: 5 / 12

Package Contents
Fosi Audio TB10A Amplifier *1
AC Power Cord *1
24V Power Supply *1
Instruction Manual *1
Quick Setup
Preparation
Prepare 1: TB10A, 24V power supply, passive speakers, speaker
wires or banana plugs;
Prepare 2: Connect the TB10A to the passive speakers via the
speaker wire or banana plugs;
Prepare 3: Connect the 24V power supply to the DC input;
Prepare 4: Toggle the power switch on the front panel upwards to
turn on the TB10A amplifier.
Note: Be sure that the volume/power switch is in the OFF position
before connecting the power supply.
How to connect the speaker wire?
Method 1: Bare wire connection illustration
: Release the horn terminals block terminals;
: Insert the two ends of the speaker wire into the
amplifier and speaker terminal holes;
: Tighten the horn terminals;
Note: Please avoid the speaker wires being exposed and touching
the amplifier casing, as this may cause a short circuit fault.
Method 2: Banana plugs connection illustration
: Release the banana jacket;
: Loosen the screw;
: Insertion speaker wire and tighten the screw;
: Tighten the banana jacket;
: Insert the banana plug into the horn terminals of the
speaker and amplifier.
Note: Please take care to avoid contact between the two banana
plugs and causing a short circuit fault as some of the
banana plugs are metal cased.
1
2
3
4
5
1 2 3
Follow RCA Input Steps:
Prepare:
audio source (take a phone as an example), a RCA cable
or a 3.5mm AUX to RCA cable (some devices will need).
Step 1: Connect your phone to TB10A via a 3.5mm to RCA cable;
Step 2: After a successful connection to TB10A,The input mode
indicator light will turn red;
Step 3: Open the audio application, play and enjoy!
Note: Please keep the TB10A away from other electric device. The
TB10A can't use with a radio simultaneously
Release Jacket Loosen Screw
Insertion speaker wire
tighten screw
Tighten Jacket
1 2 3 4
banana plug into
the horn terminals
5