PC-USB Operation Instructinos:
1. Connect the PC-USB interface of the rear surface of the
machine with factory provided USB cable (USB can support
hot plug).
2. Press the input signal selection switch to select USB input.
3. The following photo shows the icon with horn symbol in the
lower right corner of PC.
4. Right click to pop up the dialog box and click <choose play
device>.
5. Select the playback device recognized by PC in the pop-up
dialog box(XMOS…).
6. Click to confirm the identified digital output.
A………Input channel display area, display separately according
to selection USB/BT/ Coaxial /Optical
B………Input sampling rate display area, no signal displayed
C………Volume display area
，
Volume 0-99
D………The bottom is the volume progress bar
OLED Show: