F;default: C).
nd Chill, Heat Index,
l register
an minimum range,
ill display --.-, if it is higher than highest range, will display --.-.
- Press the
SET
key 17th to select rainfall unit ( in/mm; default: mm).
te,
ay, week, month and total.
Press the
RAIN
key for 2 seconds to reset current display rain.
Reset week rain, will auto reset day rain
Reset month rain, will auto
reset week and day rain.
Reset total rain, will auto reset month, week and day rain.
Note:
nt is over and value reset to 0 if last 24 hour rainfall less
- In normal model,press the
TEMP.
key to view wi
Dew Point Temperature. Press the
TEMP.
key for 5 second, wil
new transmitter.
Note: every 60 second the unit will measure indoor temperature, indoor
humidity and pressure. If temperature is to lower th
w
6.4.9 Wind speed
- Press the
SET
key 16th to select wind speed unit ( km/h, mph, knots,
/s, bft;default: km/h ).
m
- In normal mode,press and release the
WIND/+
key to view the wind,
gust and wind direction.
6.4.10 Rain
- In normal mode,press and release the RAIN key to view rain of ra
event, d
-
Note:
Rain rate: the last 10 minutes rainfall multiplication 6.
Rain event: It start to record the rain event value form the rain falls,
the rain eve
21
