Fosgate Audionics FAP V1, Руководство пользователя

Страница: 11 / 32

FFAAPP VV11
Controls
1111
. RCA Connectors – Are a non-magnetic, eutectic Brass,
Rhodium over Silver plate.
. Signal Caps – Are a Metallized Polypropylene Film
Capacitor and Polypropylene Film and Foil Capacitor.
* Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
© 1992-1997 Dolby Laboratories, Inc. All rights reserved.
1. The INPUT selector – Used to select different two
channel inputs; CD – TAPE – VID1 – VID2 – DVD –
AUX1 – AUX2 – AUX3.
2. The RECORD OUT selector – Used to select two
channel feed to a recorder; CD – TAPE – VID1 –
VID2 – DVD – AUX1 – AUX2 – AUX3.
3. The MODE selector – Used to select STEREO
BYPASS – PL II (Dolby ProLogic II) – PANORAMA –
MATRIX – 7.1 BYPASS.
STEREO BYPASS – normal stereo is reproduced.
All surround sound circuitry is bypassed, the
surround sound front left and right speakers and
sub are active, and the steering logic is switched off.
Use this mode to hear normal two-channel stereo
from any two-channel input.
PL II (Dolby ProLogic II) – use for movies
and music. This mode gives a mostly frontal
presentation on stereo recordings and proper
decoding of Dolby ProLogic encoded movies.
PANORAMA – gives more of a "wrap around" effect
with music and movies. Information recorded in the
"left input channel only" will be positioned on the
left center sidewall instead of left front; information
recorded in the "right input channel only" will be
positioned on the right center sidewall instead of
right front. Movies will not play back as they were
encoded, but will be presented with the sounds
originally placed across the front stage "wrapped
around" the front half of the room from center
sidewall to center sidewall.
* I prefer the Panorama mode for most music
and about half of my movies, but remember my
preference is admittedly back heavy.
MATRIX – The logic steering is inactive. This mode
is intended for mono movies to give a sound "all
around" instead of just center front. It is also useful
for playing music, especially classical music, if
you want to hear it in surround sound without
steering logic.
7.1 BYPASS – The logic steering is inactive. This
sends the incoming signal from the 7.1 inputs
through the volume control and output stages to
the 7.1 outputs.
The FAP V1 has many controls to accommodate a wide variety of recorded material and personal taste.