8
9
12
13
14
11
10
15
To disable recording, click again the button in the channel, or
uncheck the
channel
checkbox on the
Manual Record
interface.
Note
The maximum number of 4 playback video channels have been
reached, please deselect other channels first to continue.
Note
Note
This product supports 32-bit IE8 or later versions and does not
support 64-bit IE browsers. It also supports Apple Safari and
Mozilla Firefox browsers.
8.1 Network Configuration
8.3 Access to the NVR in WAN
Now you can access to your NVR using the DDNS address, such as
https://domain name:HTTPS port
.
As an example: https://a6747.myfoscam.org:443
Click
Add New...
If there is a UPnP function in your router.
Choose “Forwarding > UPnP”, make sure that the
Current UPnP Status
is
Enabled
.
If UPnP has been
enabled
in the router, you do not need to perform
the following steps.
If UPnP is
disabled
, you need to select one of the following methods
to configure port forwarding on your router.
For these steps, we will be using the
TP-LINK brand wireless router as
an example.
If there is no UPnP function in your router:
You need to manually add port forwarding, refer to the following
steps. You need go to the “
Forwarding > Virtual Servers
” panel for
setup.
You can also access the NVR or IP Camera directly through the local
network and remotely via manual port forwarding.
Click
Save
a6747.myfoscam.org
Check
DDNS
Check
Enable DDNS
4.
Repeat the Step3 to add multiple IP Cameras. Find your IP Camera in
the
IP Camera List
, then click the
Finish
button to complete the
setup wizard.
After the IP Camera is added successfully to the NVR, there are two ways
to enable manual recording functionality when in the Live View mode.
Method 1
Left click the mouse in the channel, and some buttons will pop up as
shown .
You can see the recording information, include Manual Record, Alarm
Record, Schedule Record.
1.
Right click the mouse in the Live View mode, and a shortcut menu
will pop up.
2.
Select the
Playback
to enter the
Playback
page.
3.
Select the time and Video Type of the recording. Check the Channels,
and you can check up to four channels.
4.
Click the
Search
button. Then you can see the recording video in the
Playback page.
Method 2
1.
Right click the mouse in the Live View mode, and a shortcut menu
will pop up.
2.
Select the
Manual Record
to enter the
Manual Record
page.
3.
Check the channels for which you want to enable recording. Click the
OK
button.
4.
Then click the icon to exit the interface.
In the Live View mode, the icon is at the bottom right of the screen
for each channel, indicating recording is on going.
1.
Configure network information.
Right click the mouse in the Live View mode, choose “Menu >
Settings > Network”. Check the
Network
checkbox, then configure
the network information of the NVR.
It is highly recommended to set the port
range from 5000 to 65535,
and the value of the port for each device should be unique.
2.
Configure the DDNS.
Right click the mouse in the Live View mode, choose “Menu > Settings
> Network”. Check the
DDNS
checkbox. Enable DDNS on the NVR. We
recommend you to use the DDNS by default.
The live view interface will show you the video feed of each IP Camera.
If you have problems with your Foscam device, please contact the
Foscam reseller you purchased from, or you can e-mail the Foscam
headquarter technical support team:
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
Your valuable comments and suggestions on improving Foscam
products are welcomed!
Select the
Type
Check
Network
Set the
HTTP Port
or
HTTPS Port
IP Address
: Set it to an IP address of
NVR in the range of the router
address pool, or keep it as default.
Subnet Mask
: Keep it as default.
Gateway
: Should be the same as the
Router’s IP address.
DNS Server:
Should be the same as
the router’s DNS Server address.
Check
UPNP
Click
Save
8.2 Access to the NVR in LAN
Open the ”Equipment Search Tool” in the resource CD. It will display
information of the NVR on your LAN.
Double click the NVR in the list, and your default browser will open up
to the login page.
You can access to the NVR via the browser in LAN.
6
Manual Recording
7
Playback
8
Remote Access
9
IR Remote Control Description
(Only FN3104H)
10
Technical Support
FN3109H
Click the button to enable recording.
Power
Recording
NO. (0-9)
Switch
Sequential
Menu
Management
ESC
PTZ
Direction
Previous
Frame Forward
Next
OK
Rewind
Play/Pause
Fast Forward
Playback
Input the port and IP address
of your NVR and click
Save
.
443
443
7. Click
OK
3. Select the
Channel
5. Input the
Username
and
Password
of the IP Camera
.
4.
Enusre that the IP address of the
IP Camera and NVR is on the same
network IP segment, and that the
subnet mask and gateway are the
same as the NVR's.
Click
Finish
6. Select the protocol.
CE Certificate Website:
http://www.foscam.com/company/ce-certificate.html
