ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
. 264
4.
After your camera has been successfully added, you can
access it from anywhere, at any time via the Foscam App or
Foscam Cloud Service.
3
FAQ
After scanning the camera QR code, the QR Code UID should
now be auto populated. Follow the steps below to connect your
camera to your wireless network.
Success: The camera has
been added successfully.
Fail: Please confirm the
password of wireless router or
camera, and then re-add.
4
Technical Support
If you have problems with your Foscam IP Camera, please
contact the Foscam reseller you purchased from,or you can
e-mail the Foscam headquarter technical support team:
.
Your valuable comments and suggestions on improving
Foscam products are welcomed!
Forget Username / Password
Restore your camera back to factory settings:
1.
Press "Reset" button for about 10 seconds with camera
energized.
2.
Release the button and wait about 30 seconds. The camera
will automatically restart and be restore to factory settings with
its username / password set to admin / (blank ). (you will need
to re-connect your Wi-Fi).
Please Note:
After restoring the camera to factory default settings, the
default connection is EZLink mode.
In case your device failed to add via EZLink mode, you can
use wired connection. Please refer to the User Manual on
the CD .
★
FOSCAM‘s Cloud Platform
★
Access your Foscam camera(s) remotely via the Foscam Cloud
service.
Visit: https: //www.myfoscam.com
a. The Camera default username
is
admin
and there is no
password .
b. Enter a new secure password.
c. Enter the
Password
of your
wireless router.
d. Click "CONNECT".
2014-10-20 10:28:16
Anonymous
