FI9802W Quick Installation Guide
www.foscam.com
- 11 -
Figure 2.6
– Static IP address and port 2000 set in IP Camera Tool
How do we assign a different Media Port for the camera?
Login to the camera; then click on
Settings
at the top, then click
Network
on the left side. Next, click
the
Port
section.
Figure 2.7
– The Port Settings page.
This page allows you to change the Media port and HTTP port, however, remember that the two
ports need to be different.
Once you change the Media port, click save to save the settings, you may need to wait about 10
seconds for the information to be updated.
Firstly, please check to see if your ISP (Internet Service Provider) provides a Static WAN IP address
service or a Dynamic WAN IP address service. This guide has been divided into two different
sections of setting up remote access, one for Static IP addresses and one for Dynamic IP addresses.
If your ISP provides a Static WAN IP Address please go to Chapter 5.1 (Page 12).
If your ISP provides Dynamic WAN IP Address please go to Chapter 5.2 directly (Page 13).
Setting up Remote Access
