FI8608W Quick Installation Guide
www.foscam.com
- 2 -
1)
Open the package
.
Take out the camera out of the box carefully.
2)
Mount the antenna.
Then take the Wi-Fi antenna, mount it on the SMA connector on the back
of the camera, screw the antenna to the bottom, and make the antenna stand vertically.
Figure 1.1 Mount the antenna Figure 1.2 Plug the network cable
3)
Get the camera connected to the router, and get it powered.
Use the network cable to connect the camera to the router or the switch in the LAN network at your
home or your office. Plug in the power. The red power light will turn on. And the camera will
automatically pan/tilt. If you have plugged in the SD Card, the green light at the rear of the camera
will also turn on.
Insert the CD into the CD drive of your computer and find the folder “For Windows OS”. Select the IP
Camera Tool folder. Double click
IPCamSetup.exe
to install, it pops up a window as below (Fig.1.3).
Just click button “
Next
” to finish the installation.
Figure 1.3 Click Next, next to continue the installation
1. Hardware Installation
Start Installation
2. Software Installation