FOS Technologies Super Jet Скачать руководство пользователя страница 3

 

 

 

 

 

Make sure the power cord is not  crimped or damaged. If it is damaged, ask your dealer or 

authorized agent to replace the power cord. 

 

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle 

the power cord by the plug. Never pull out the plug by tugging the power cord. 

 

During initial start-up, some smoke or smell may arise. This is normal and should decrease 

gradually. 

 

DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect 

device, the disconnect device shall remain readily operable. 

CAUTION 

1.

 

Be very careful during installation. Since you will be working with a dangerous voltage you can 

suffer a life threatening electric shock when touching live wires. 

2.

 

Please be aware that damages caused by manual modifications to the device are not subject to 

warranty. Keep away from children and non-professionals. 

3.

 

The Fog machine doesn’t include any spare parts for repair, please check if all the parts are well 

installed and screws are fitted tightly before operating. Do not use the fog machine when the 

cover is open. 

General Guidelines 

 

 

This device is only allowed to be operated with an alternating current of AC110~230V/50Hz and 

was designed for indoor use only. 

 

Do not shake the device. Avoid brute force when installing or operating it. 

 

Operate the device only after having familiarized yourself with its functions. Do not permit 

operation by person not qualified for operating  the device. Most damages are the result of 

unprofessional operation. 

 

Please use the original packaging if the device is to be transported. 

 

For safety reasons, please be aware that all modifications on the device are forbidden. 

Furthermore, any other operation may lead to short-circuit, burns, electric shock, lamp explosion, 

crash, etc. If this device will be operated in any way different to the one described in this manual, 

the product may suffer damages and the guarantee becomes void. 

 

When you use the fog machine on a wooden floor or ground with carpet, the machine should 

never be directly in contact with the ground. The machine should keep a distance with the ground 

of 50cm at least. It’s not allowed to put flammable and explosive objects within 5 meters. 

 

Before operation, please make sure the local mains power matches the rated input voltage. Please 

refer to the rating label on the rear side of the unit. 

 

Before filling the fog liquid, please unplug the unit from the mains. 

 

To prevent short circuits, please don’t let fog liquid flow into the inner part of the machine before 

filling, you can also take out the liquid bottle and fill in the fog liquid outside the unit. 

 

The fog machine must be installed on the ground. It’s not allowed to slope the unit or place it 

upside down After use, switch the fog machine off and unplug it from the mains.  

Содержание Super Jet









Отзывы: