FOS Technologies Luminus NANO, Руководство пользователя

Страница: 9 / 20

User’s Manual
8
3. BATTERY CHARGE
The fixture has a rechargeable lithium battery and auto-ranging charger built in. Always store the
fixtures with full battery. Depleted batteries must be recharged immediately; otherwise fixture
performance will suffer.
Battery runtime will decreased time by time. Battery runtime may be slightly shorter than
predicted due to different working enviroments.
The fixture has a DC charging input. A normal charging time is about 5 hours.
Battery capacity can be easily seen on the OLED display.
It is recommended to charge the fixture at an ambient temperature between 0°C and 35°C. If
fixture is charged but not in operation, please always keep the power switch “Off”.
Note: The battery must be replaced with an original one from the manufacuturer only.
4. PRODUCT SETUP
This fixture has a built-in rechargeable lithium battery. After it is fully charged, switch on the
fixture with the power switch at the bottom of the unit, it will start to run and can be controlled
with wireless DMX desk or IR controller.
After operation, please switch off the fixture with its power switch.
4.1 Menu Lock
Users can lock the OLED display by setting it to “On”.
Follow below steps:
- Continue pressing “Menu” till “Menu Lock” appears;
- Scroll Up/Down to select “On”;
- Press “Enter” to save your setting. The display will turn off in about 1 minute.
To unlock it, press both “Menu” and “Enter” at the same time for one 1-2 seconds, the
display will be unlocked.
4.2 Factory Reset