7. Maintenance and Cleaning
The following points have to be considered during the inspection:
1. All screws for installing the devices or parts of the device have to
be tightly connected and must not be corroded.
2. There must not be any deformations on the housing, color lenses,
fixations and installation spots (ceiling, suspension, trussing).
3. Mechanically moved parts must not show any traces of wearing
and must not rotate with unbalances.
4. The electric power supply cables must not show any damage,
material fatigue or sediments.
Further instructions depending on the installation spot and usage
have to be adhered by a skilled installer and any safety problems
have to be removed.
In order to make the lights in good condition and extend the life time,
we suggest a regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the
weakneness of the lights due to accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each
three month, make sure that the circuit contacts are in good
condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a
moist, lint- free cloth. Never use alcohol or solvents.There are no
serviceable parts inside the device. Please refer to the instructions
under “Installation instructions”.
