8. Switching the UPS On & Off
Press and hold the power switch on the front panel to start the UPS. The LED lights up when
switch is on. To turn the unit off, simply press and hold the power button until the LED
goes off.
9. DC start function
DC Start Function enables UPS to be started up when AC utility power is not available and battery
is fully charged. Simply press the power switch to turn on the UPS.
10. LCD Display
The Forza 1500LCD-C/2200LCD-C Series comes equipped with an easy to read LCD and a
blue backlight
that displays
the battery
status, input
voltage, output
voltage, and
operation
mode
of t
he U
PS. T
he LE
D rem
ains
on du
ring
norm
al op
erat
ion o
f the
UPS
, inc
ludi
ng ch
argin
g
and fault modes.
When the LCD is initially powered on, the
LCD will display all information at once.
1) When operating in normal mode, the
display appears as shown below.
4) When in off/ charging mode, the display
appears as shown below.
Note: The output voltage will always be
displayed as
000
when in off/charging
mode.
2) When operating in the AVR mode, the
display appears as shown below. The
icon blinks once every second.
3) When operating in battery mode, the
display appears as shown below. The
icon blinks once every second.
Note: If I/P-V<40V, input voltage will be
displayed as
000
.
5) When in fault mode, the display
appears as shown below. Only the
FAULT
indicator and the reason for the malfunction
will be displayed in this case.
Note: A fault message will appear every time the
UPS enters fault mode.
INPUT/BATTERY
(Unit: VDC/Hz/VAC)
OUTPUT/LOAD/FAULT
(Unit: %/Hz/VAC)
LOAD LEVEL
BATTERY CAPACITY
LINE MODE (AVR)
BACKUP MODE
Power button
