SCM6000
8 |ENG
Start of operation
Battery
Before the first operation with the measuring device charge the battery completely. (see also
chapter “Lithium-Ion battery” on page 10).
Load the accumulator during the first loading procedure at least 5
hours.
The maximum battery charging time is approximately 12 hours.
Switch-on the Device
ð
Press 2-3 seconds the red power button on the meter.
Lithium-ions-battery
Explosion danger!
Never the two poles (+ and -) connect with each other!
Attention!
Storing or operating accumulator no more than 40° C.
Not burning or damaging accumulator.
Not taking accumulator to contact with water.
Charging the battery
The maximum battery charging time is approximately 12 hours.
A charging circuit in the measuring device provides an optimal charge of the
battery. The device is charged if it is switched off.
è
Turn the device off, if it is not already off.
è
Connect the Euro-main cable with the external AC adapter.
è
Connect the external AC adapter to the power grid.
è
Connect the AC adapter to the low-voltage port at the bottom.
è
The battery is charged as soon as you connect the AC adapter to the
