REPLACING REMOTE CONTROL BATTERIES:
Remote control
Before using the remote control remove the small plastic sheet from the battery cover.
1.Light ON
2.Light OFF
3.PLAY/PAUSE: The lamp will
gradually change between
7colors.
When the color is scrolling, press
again to hold and select your
favorite static color.
4.COLOR: Color selections, 7 static
colors
5./–: Light intensity up
and down
6.CANDLE: The light will simulate
the candle flicking effect.
7.SPEED: Light scrolling speed
selections.
8.WHITE
2
• Removing the old battery by pressing the tab on the side of the battery cover and
then sliding off the cover from the remote control.
• Take notice of the positive (+) and negative(–) direction of the battery. Make sure
that the new battery (CR2025) is inserted the right way.
• Dispose of the old battery responsibly.
Warnings and Cautions:
These products and their packaging are not toys; please keep out of reach of children.
• The remote control and USB Cable/charger are not waterproof a
nd must be kept in a
dry location at all time.
• Never charge the product in a pool, water or rain; charge in a dry, indoor location.
• Disconnect the power adapter from main power outlet when not in use.
• Do not stand or jump on this product.
• Do not sit on this product if it is cracked or damaged.
• Keep the product away from chemicals and heat.
• Do not attempt to disassemble the product.
1
3
5
7
2
4
6
8
ON
OFF
PLAY/PAUSE
COLOR
BRIGHT
±
CANDLE
SPEED
WHITE
