Connecting to an External Device
Voice Recorder
Connecting to an External Device
Voice Recorder
Please adopt temporary measures as follows when upgrading firmware did not be
completed normally because of the batteries separation or shock to the unit.
Remove the batteries from the unit please.
Push down Hold key and set up Hold-On mode.
Press and hold REC button and connect the unit to PC via
USB cable.
Please repeat the above procedures of upgrading firmware from
No.2 to No.5.
Trouble shooting in case of error while upgrading firmware
Firmware Upgrade
This unit provides the Firmware Upgrade function to improve the unit functions and
to correct errors.
Connect the recorder to PC thru USB cable
Execute DVR Manager and download FSV510_FIRMUP.ROM (UPGRADE
FILE) to D folder of the recorder.
After download is completed, disconnect USB cable.
Power on the unit. Then the unit is upgraded automatically. Remove
the batteries when FINSH appears on the display and put the
batteries on again.
Do not remove the batteries or drop or give a shock to the unit while upgrading
firmware.
Caution: In case of downloading upgrade file, there should be no file at D folder.
Caution: DVR Manager should be installed in advance.
(Refer to Installation of DVR Manager)
Содержание FSV-510
Страница 1: ...MADE IN KOREA Version 2006 6 ...