Forum LGMF9120, Инструкция по эксплуатации, Страница: 2 / 23

Notice
IMPORTANT: A gazebo may entail purchasing a municipal permit or be subject to specific
building codes. It is the consumer’s responsibility to inform themselves of any restrictions.
It is important to read and follow all safety information prior to assembly of the unit as well as
during usage to reduce risk of injury and avoid damage to the product and its surroundings.
It is highly recommended to avoid installing and settling your gazebo in a corridor of heavy
wind.
Follow all assembly instructions.
Operation
The gazebo is intended to be used as a shelter. Do not use this product for anything other
than its intended use.
Your shelter has been designed to be enjoyed during all four seasons and will resist snow
accumulations up to 2000 lbs (907 kg). For your comfort and safety, it is recommended not to
use the gazebo during sub-zero temperatures.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM ALL FABRICS.
Do not place any type of space heater, heat conductor, or exposed flame under or within 5
feet of the gazebo.
The fabrics meet the flammability requirements of the CPAI-84. The fabrics may burn if they
are in continuous contact with a flame. Any foreign substance applied directly to the fabrics
may weaken the flame-resistant properties.
Avoid using excessive force while opening or closing the mosquito netting. When tying the
netting to the columns, be mindful not to make the Velcro tangle with the netting.
Do not suspend or hang from the structure any objects exceeding 15 lbs (6.8 kg).
Maintenance and Care
Check periodically that the gazebo is anchored properly to the floor or ground and that all
bolts remain tight to maintain the solidity of the structure.
Remove any foreign objects from the roof in order to avoid damages.
Remove any snow accumulation on the roof at all times. Make sure there is no ice buildup
anywhere on the main structure.
Remove all accessories during the winter.
To order replacement parts refer to the model # of the unit as well as part # in the parts list.
2