FPR-200
Page
Total
18
Pages
9
6. Installation Steps
Item
No.
Installation
Item
Step Description
1
FPR-200 Main Device
1-1
Take out the Main Device from package box.
1-2
According to this manual, item 4.2 wire marking and 3.3, 3.4, 3.6 diagram
number, insert plugs into FPR-200 Main Device sockets separately.
1-3
Insert SD card into SD card slot in right side of the Main Device.
2
Lens
1.1
Use 30mm
Φ
drill to drill holes in the center of front and rear bumper.
Then, fasten front and rear lens by using nuts.
1.2
Lock left and right Lens below rearview mirror separately by fastening
clamp plates.
3
Video Monitor
1.1
Install Ceiling-mount and fasten video monitor by using clamp plates.
1.2
Video monitor is fixed on the front window of vehicles by pressing spring
of fixing seat.
4
Wiring
（
According Diagram 4-3 to take procedure
）
Number
Name
Marking
Color
Wiring Descriptions
4.1
FPL-01
GPS ANT
GPS
Antenna
Orange
FPR-200 Main Device
→
right side of vehicle mat
→
rear carriage
→
lower part of rear vehicle
window
→
attaching the antenna to corners of rear
vehicle window
4.2
FPL-02
B&L
Video
Back
Len
Wires
Yellow
FPR-200 Main Device
→
vehicle mat
→
trunk
→
rear
bumper
→
insert four-wire plug into socket of lens
Left Len
Wires
Yellow
FPR-200 Main Device
→
vehicle mat
→
harness of
left guard
→
bottom of left rearview mirror
→
insert
four-wire plug into socket of lens
