1080 Centre Rd. Suite C
Auburn Hills, MI 48326
www.fortrezz.com
Phone: (248) 481-7092
Made in USA
18Sept2012
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation
distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To
ensure compliance, operation at closer than this distance is not recommended.
Canada: Industry Canada Statement per Section 4.0 of RSP-100.
The term "IC:" before the certification/registration number only signifies that the Industry Canada technical
specifications were met.
From section 7.1.5 of RSS-GEN. Operation is subject to the following two conditions: 1) This device may not cause
harmful interference, and 2) This device must accept any interference received, including interference that may cause
undesired operation.
From section 7.1.1 RSS-Gen, Issue 2, June 2007 a) The host device, as a stand-alone unit without any separately
certified modules, complies with all applicable Radio Standards Specifications. b) The host device and all the
separately certified modules it contains jointly meet the RF exposure compliance requirements of RSS-102, if
applicable. c) The host device complies with the certification labeling requirements of each of the modules it contains.
From section 5.2, RSS-Gen, Issue 2, June 2007 Equipment Labels:
Contains IC: 8156A-Z3X
From section 7.1.6, RSS-Gen, Issue 2, June 2007 Digital Circuits: If the device contains digital circuitry that is not
directly associated with the radio transmitter, the device shall also have to comply with ICES-003, Class A or B as
appropriate, except for ICEC-003 labeling requirements. The test data obtained (for the ICES-003 tests) shall be kept
by the manufacturer or importer whose name appears on the equipment label, and made available to Industry Canada
on request, for as long as the model is being marketed in Canada.
Europe
The SSA3 module has been certified for use in European countries.
Completed testing: Test standard: ETSI EN 300
328 V1.7.1 (2006-10).
The Waste Electrical and Electronic Equipment (WEEE) directive (2002/96/EC) was approved by the
European Parliament and the Council of the European Union in 2003. This symbol indicates that this
product contains electrical and electronic equipment that may include batteries, printed circuit boards,
liquid crystal displays or other components that may be subject to local disposal regulations at your
location. Please understand those regulations and dispose of the product in a responsible manner.
LIMITED WARRANTY
THE PRODUCT IS PROVIDED WITH ONE YEAR LIMITED MANUFACTURER WARRANTY. FORTREZZ, LLC
warrants its products to be free from defects in material and workmanship under normal use for one year, and is not
responsible for consequential damages or installation costs of any nature. FORTREZZ, LLC. expressly disclaims all
implied warranties, including but not limited to the implied warranties of merchantability and fitness for a particular
purpose. FORTREZZ, LLC does not warrant, guarantee, or make any representations regarding the use or the
results of the use of the products or any accompanying materials in terms of their correctness, accuracy, reliability or
otherwise. In no event shall FORTREZZ, LLC. be liable to Purchaser hereunder or in respect of any products ordered
or delivered to Purchaser, whether in contract, tort including negligence or otherwise for a loss of profits or loss of use
or for any incidental, consequential, special or indirect damages howsoever caused whether or not FORTREZZ, LLC.
has been advised of the possibility of such loss or damage. FORTREZZ, LLC's maximum liability to Purchaser under
these conditions shall in no event exceed the amount paid by Purchaser for the products that are the subject of the
claim and in respect of all claims for products ordered from FORTREZZ, LLC to which these conditions apply to the
amount paid by Purchaser for the products which are the subject of the claims.
If you are not comfortable with your limited warranty, or not completely satisfied with the SSA3, or the SSA3 does not
perform as expected we encourage you to return the SSA3 to your DISTRIBUTOR for an exchange or for a full refund
within 30 days of purchase. Or, you can return the SSA3 to FORTREZZ with an RGA number. All products to be
returned to FORTREZZ, LLC. must have a valid Returned Goods Authorization (RGA). Send the returned unit to:
FortrezZ, LLC Warranty Replacement, 1080 Centre Rd. Suite C Auburn Hills, MI 48326,
return postage prepaid.
You must use the original packaging and include a proof of purchase (photocopy of receipt) along with the RGA #.