Fortress Technologies S1, Руководство пользователя

Страница: 10 / 63

5
WiFi Button
The WiFi Button is used to connect the S1 main
panel to your existing WiFi signal while using the
free “My Fortress” mobile app. Press and hold the
button for 3 seconds to enter “Smart Config Mode.”
Quickly press and release the button again after
that to enter “AP Config Mode.” More information
about these configuration modes can be found in
the “Connecting to WiFi” section of this manual.
Set Button
The Set Button is used for a number of different
functions including adding and removing sensors,
remote controls, RFID key tags, and more. This
manual will refer to the Set Button in later sections.
Power Button
The Power Button will turn the power on and off
for the panel when the power cable is unplugged.
Press and hold this button for 3 seconds to turn the
panel on or off.