PARTS DESCRIPTION
INSTALLATION INSTRUCTION
Caution: Please unplug the appliance before installation.
1.
Base plate installation
•
Loosen the L-type screw in anticlockwise direction to remove it from the standing
tube.
•
Insert the standing tube into the central hole of the base plate.
•
Screw the L-type screw in clockwise direction to fix the standing tube on the base
plate.
2. Fan body installation
•
Insert the fan body into the standing tube and fix them by tighten the arc screw.
3. Guard and fan blade installation
A. Rear guard
•
Unscrew the blade cap from the motor shaft in clockwise direction.
•
Unscrew the guard lock from the motor shaft in anticlockwise direction.
•
Set the rear guard and fit it well on the three position poles and make sure these poles
are properly put through the holes on the rear guard. Hold the rear guard and tighten
the guard lock in clockwise direction on the motor shaft.
1. Front guard
2. Guard ring
3. Blade cap
4. Fan blade
5. Guard Lock
6. Rear guard
7. Front motor cover
8. Rear motor cover
9. Control button
10. Power cord
11. Fan body
12. Arc screw
13. Standing tube
14. Base plate
15. L-type screw
16. Remote control
17. Handle
position
poles
guard lock
-3-
-4-
