Fortress Technologies FSAV10M16, Руководство пользователя

Страница: 8 / 32

Air flow direction control
Adjust the air flow direction properly. Otherwise it
might cause discomfort or cause uneven room
temperatures.
Adjust the horizontal/vertical louver by the remote
control.
To set the horizontal/vertical air flow direction
Perform this function while the unit is in operation.
Use the remote control to adjust the air flow direction.
The vertical/horizontal louver changes approximately 6
degree in angle for each press, the louver can also be set
to swing up, down, left and right automatically.
Please refer to the
REMOTE CONTROL USER MANUAL
for details.
IMPORTANT : Do not put your fingers into the panel of
blower and suction side. The high-speed fan inside may
cause danger.
Do not operate the air conditioner for long periods with
the air flow direction set downward in COOL or DRY
mode. Otherwise, condensation may occur on the
surface of the horizontal louver causing moisture to
drop on to the floor or on furnishings.
When the air conditioner is switched on immediately
after it was stopped, the horizontal louver might not
move for approximately 10 seconds.
Open angle of the horizontal louver should not be set
too small, as COOLING or HEATING performance may
be impaired due to too restricted air flow area.
Do not move the horizontal louver manually. Otherwise
the horizontal louver will be out of sync.
During operation, do not operate with horizontal louver
in closed position to block the air outlet.
When the air conditioner is connected to the power
(initial power), the horizontal louver may generate a
sound for 10 seconds, this is a normal operation.
CAUTION
(Horizontal louver)
Range
Range
(Vertical louver)
7