Operation Instruction
Mechanical type
1.
Plug the unit into a correct mains socket. (Please refer to the rating label
at the rear of the unit for correct voltage/frequency.)
2.
Switch the HUMIDISTAT to required
humidity setting. The intensity of the
humidity extraction is increased clockwise.
For continuous working, set the humidistat to
position 'MAX'.
3.
As the unit starts to work, the power
Indicator should come on.
4.
As the water in the water tank is full, the
“Water Full” indicator will come on and the machine will stop working.
Electrical type
1.
Plug the unit into a correct mains socket. (Please refer to the rating label at the rear of
the unit for correct voltage/frequency.)
2.
Press ON/OFF button to turn on the unit. The compressor will start to work.
3.
Press “HUM” (humidity) button to setting the working model you need: continuous
working, humidity 50%, 60%, 70% or 80%. The relative indicator will light on.
4.
Press “SPEED: button to set the ventilation speed, high or low. The relative indicator
will light on.
5.
Press the “TIMER” button to set the operating hour you need (1~24 hours). The
display window will show the hour(s) you set as you press the TIMER button, after
releasing it for 8 seconds around, the display window will return to the room humidity.
As the set time has been reached, the compressor will stop working automatically.
6.
By pressing the ”TEMP” button, the display window will show the room temperature,
after releasing the button for 8 seconds around, the display window will return to the
room humidity.
7.
To turn off the unit, press ON/OFF button again.
8.
Pre-setting function: By pressing TIMER button but without turning on the
other functions (including ON/OFF button), you can PRE-SET the time for the machine
to work. For example, if you press the timer to ‘2’, the unit will work automatically
after 2 hours.
4
