Fortress Technologies ES210, Руководство пользователя

Страница: 104 / 242

Bridge GUI Guide: Network Configuration
89
additional security options described under WPA,
WPA2 and WPA2-Mixed Security in Section 3.3.5.10.
and

Optionally configure any additional interface settings,
as described in sections 3.3.5.2 through 3.3.5.8.
9
Click
APPLY
in the upper right of the screen (or
CANCEL
the
action).
To preconfigure a Station Mode ES210 Bridge
to connect to a specific network:
1
Log on to the Bridge GUI through an
Administrator
-level
account and select
Configure
->
Radio Settings
from the
menu on the left.
2
If you are configuring one or more Advanced View settings
(see tables 3.5 and 3.9), click
ADVANCED VIEW
in the upper
right corner of the page. (If not, skip this step.)
3
Preconfigure the radio on which you will create the
STA
Interface with settings that will permit it to connect to the
same network as the
STA Interface
. Refer to Section 3.3 for
guidance.
4
In the Radio Settings frame for the radio configured in Step
3, under
STA Interface
, click the
ENABLE STATION
button to
display the
ADD STATION
and
DELETE STATION
buttons.
5
Click the
ADD STATION
button.
NOTE:
For WPA
PSK authentica-
tion, you must enter the
correct key in the
WPA
Key
/
WPA Key Confirm
fields, as described in
Section 3.3.5.10. These
fields do not apply (and
are greyed out) for En-
terprise WPA modes.
6
In the Radio screen’s Add Station Mode frame:

Enter at least a
STA Name
(Section 3.3.5.2) and the
SSID (Section 3.3.5.3) of the network the Bridge will be
connecting to.

Leave
Admin State
at the default of
Enabled
(Section
3.3.5.1).

Optionally preconfigure any additional setting(s)
(described in sections 3.3.5.2 through 3.3.5.10, above).
7
Click
APPLY
in the upper right of the screen (or
CANCEL
the
action).
8
If you are using
WPA
,
WPA2
or
WPA2-Mixed
Wi-Fi Security
,
import a valid EAP-TLS digital certificate to authenticate the
STA Interface
on the network it will connect to. Refer to
Section 6.2 for guidance.
9
Before connecting the STA Interface to the network, you
must enable the radio on which the
STA Interface
is
configured (Bridge radios are
Disabled
by default; refer to
Section 3.3.2.1).
3.3.5.12 Editing or Deleting the ES210 Bridge
STA Interface
An established
STA Interface
can be reconfigured or deleted.