15
LED / VALET SWITCH MOUNTING
LED:
The LED is used as a System Status Indicator and it will also FLASH for use as security deterrent when
the Alarm System is Armed.
VALET SWITCH:
Mount the Valet Switch (push-button) on dash or other accessible location. It is REQUIRED
for Emergency Disarm, Programming and entering Valet Mode (See pg 13 for Valet Mode).
VALET / PROGRAM SWITCH
STATUS LED
WIRING: SHOCK SENSOR
4 PIN SENSOR PLUG/HARNESS (RED):
GREEN Wire:
Negative Trigger.
WHITE Wire:
Negative Warn-A-Way.
BLACK Wire:
Sensor Ground.
RED
Wire:
Sensor 12V Power.
SHOCK SENSOR:
The sensor supplied with
this system does not require any additional
wiring. Simply mount the sensor in a suitable
location, plug it in, and adjust the sensitivity.
SENSOR ADJUSTMENT
Clockwise = Higher Sensitivity
Counter Clockwise = Lower Sensitivity
