Fortis FST3RUNPADA, Руководство пользователя

Страница: 19 / 24

How to adjust the running belt?
1. Insert the 6mm inner hexagonal wrench into the adjusting screw on the left side of
the running belt and rotate the wrench clockwise for 1:4 turns to adjust the rear
roller to tighten the running belt.
2. Repeat step 1 to adjust the right screw. Check that the adjustment screw rotates
the same distance so that the rear roller is adjusted parallel to the frame.
3. Repeat steps 1 and 2 until the running belt does not slip.
4. Note: The running belt can't be adjusted too tightly, which will break the running
belt and increase the pressure of the front and rear rollers, causing problems such
as roller bearing damage and abnormal noise. If you want to reduce the tension of
the running belt, turn the wrench counter clockwise. Note that the left and right
sides are rotated to the same distance.
Adjust the running belt to the middle position
When using the treadmill, the pressure on the running belt is unbalanced because the two
feet exert different forces when running, that causes the belt deviate from the centre. This
deviation is normal. When no one is on the running belt, it will return to the centre. If it does
not return to the centre, you will need to adjust the belt back to the centre.
1. Move the walking machine to no-load operation and adjust the speed to 6km/h.
2. Observe the distance from the running belt to the left and right border. If left
deviation, use inner hexagonal wrench, rotate the left 1/4 screw clockwise. If right
deviation, use inner hexagonal wrench and turn the 1/4 screw on the right side
clockwise. If the running belt is still not in the middle, repeat the above action until
it is adjusted to the middle.
3. After adjusting the running belt to the middle, adjust the speed to 1km/h and
observe the deviation of the running belt and check whether there is slipping during
running. If there is a deviation, repeat the running step.
4. Warning! Do not over tighten the rollers! This will cause permanent bearing
damage. If the above steps are not effective, you need to tighten the running belt
again.