Fortis EXR-200, Руководство пользователя

Страница: 13 / 16

Buttons
MODE
Press this button to changeover display or choose the window needs to be set.
In monitor status, hold this button for 3 seconds to reset all value to zero.
Functions
SCAN
Press MODE button until “SCAN” appears, computer will rotate through all the 5
functions: Time, Speed, Distance, Calories and pulse. Each display will be hold for 6
seconds.
SPEED
Display instantaneous speed.
TIME
Count the total time from exercise start to the end.
DISTANCE
Count the total distance from exercise start to the end.
CALORIES
Count the total calories consumed from exercise start to the end.
PULSE
Hold the pulse sensor and read your heart rate per minute.
AUTO START/STOP
Without any signal of exercise or operation for 4minutes, the power will turn off
automatically. Once receive exercise or operation signal, the monitor will turn on
automatically.
Operation
PULSE RATE
Remark: During the process of pulse measurement, because of the contact jamming,
the measurement value may be higher than the virtual pulse rate during the first 2
～
3
seconds, then will return to normal level. The measurement value cannot be regarded
as the basis of medical treatment.
OPERATION