Fortinet Server Authentication Extension Version 1.5 Technical Note
16
01-30005-0373-20071001
Configuring FSAE on FortiGate units
Using FSAE on your network
Figure 4: New User Group dialog box
3
In the Name box, enter a name for the group, Developers, for example.
4
From the Type list, select Active Directory.
5
From the Protection Profile list, select the required protection profile.
6
From the Available Users list, select the required Active Directory groups.
Using the CTRL or SHIFT keys, you can select multiple groups.
7
Select the green right arrow button to move the selected groups to the Members
list.
8
Select OK.
Creating firewall policies
Policies that require FSAE authentication are very similar to other firewall policies.
Currently, only one single authentication firewall policy can be configured if the
source interface/source IP pair is the same.
To create a firewall policy for FSAE authentication
1
Go to
Firewall > Policy
and select Create New.
2
Enter the following information:
3
Select Authentication and then select Active Directory from the adjacent list.
4
Select the required user group from the Available Groups list and then select the
right arrow button to move the selected group to the Allowed list.
You can select multiple groups using the CTRL or SHIFT keys.
5
Select OK.
Source interface and address
as required
Destination interface and address
as required
Schedule
as required
Service
ANY
Action
ACCEPT
NAT
as needed
Содержание Fortinet 1.5
Страница 1: ...www fortinet com Fortinet Server Authentication Extension Version 1 5 T E C H N I C A L N O T E...
Страница 4: ...Fortinet Server Authentication Extension Version 1 5 Technical Note 4 01 30005 0373 20071001 Contents...
Страница 19: ...www fortinet com...
Страница 20: ...www fortinet com...
