manualshive.com logo in svg

Fortinet FortiGate FortiGate-800, Инструкция по установке

Поделиться
Скачать
Fortinet FortiGate FortiGate-800 Скачать руководство пользователя страница 10

FortiGate-800 and FortiGate-800F FortiOS 3.0MR4 Install Guide

10

01-30004-0269-20070215

About this document

Introduction

FortiBridge

FortiBridge™ products are designed to provide enterprise organizations with 
continuous network traffic flow in the event of a power outage or a FortiGate 
system failure. The FortiBridge unit bypasses the FortiGate unit to make sure that 
the network can continue processing traffic. FortiBridge products are easy to use 
and deploy, and you can customize the actions a FortiBridge unit takes when a 
power failure or a FortiGate system failure occurs. 

FortiManager

The FortiManager™ system is designed to meet the needs of large enterprises 
(including managed security service providers) responsible for establishing and 
maintaining security policies across many dispersed FortiGate installations. With 
this system, you can configure multiple FortiGate devices and monitor their status. 
You can also view real-time and historical logs for the FortiGate devices, including 
updating firmware images of managed FortiGate devices. The FortiManager 
System emphasizes ease of use, including easy integration with third party 
systems.

About this document

This document explains how to install and configure your FortiGate unit onto your 
network. This document also includes how to install and upgrade new firmware 
versions on your FortiGate unit. 

This document contains the following chapters:

•

Installing the FortiGate unit

 – Describes setting up and powering on a 

FortiGate unit.

•

Factory defaults

 – Provides the factory default settings for the FortiGate unit.

•

Configuring the FortiGate unit

 – Provides an overview of the operating modes 

of the FortiGate unit and how to integrate the FortiGate unit into your network. 

•

FortiGate Firmware

 – Describes how to install, update, restore and test 

firmware for the FortiGate device. 

Document conventions

The following document conventions are used in this guide:

• In the examples, private IP addresses are used for both private and public IP 

addresses.

• Notes and Cautions are used to provide important information:

Note: 

Highlights useful additional information. 

!

Caution: 

Warns you about commands or procedures that could have unexpected or 

undesirable results including loss of data or damage to equipment.

Содержание FortiGate FortiGate-800

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды