background image

358

01-28006-0092-20041105

Fortinet Inc.

Log config

Log & Report

Figure 183:Example traffic and event log filter settings

Traffic log

The Traffic Log records all the traffic to and through the FortiGate interfaces. You can 
configure logging for traffic controlled by firewall policies and for traffic between any 
source and destination addresses. You can also apply global settings, such as 
session or packet log. You can apply the following filters:

Event log

The Event Log records management and activity events, such as when a 
configuration has changed or a routing gateway has been added. You can apply the 
following filters:

Policy allowed 
traffic

The FortiGate unit logs all traffic that is allowed according to the firewall 

policy settings.

Policy violation 
traffic

The FortiGate unit logs all traffic that violates the firewall policy settings.

Note: 

You can enable traffic logging for specific interfaces or firewall policies. See 

“Enabling 

traffic logging” on page 360

 for more information.

Содержание FortiGate FortiGate-300A









































































































































































































































































































































































































Отзывы: