manualshive.com logo in svg

Fortinet FortiGate 50R, Руководство по установке и настройке, Страница: 64 / 240

Поделиться
Скачать
Fortinet FortiGate 50R Скачать руководство пользователя страница 64

64

Fortinet Inc.

Manual attack definition updates

System status

Manual attack definition updates

The System > Status page of the FortiGate web-based manager displays the current 
installed versions of the FortiGate Attack Definitions used by the Network Intrusion 
Detection System (NIDS). You can use the following procedure to update the attack 
definitions manually.

1

Download the latest attack definitions update file from Fortinet and copy it to the 
computer that you use to connect to the web-based manager.

2

Start the web-based manager and go to 

System > Status

.

3

To the right of the Attack Definitions Version, select Definitions Update 

.

4

Enter the path and filename for the attack definitions update file, or select Browse and 
locate the attack definitions update file.

5

Select OK to copy the attack definitions update file to the FortiGate unit.
The FortiGate unit updates the attack definitions. This takes about 1 minute.

6

Go to 

System > Status

 to confirm that the Attack Definitions Version information has 

been updated.

Displaying the FortiGate serial number

1

Go to 

System > Status

.

The serial number is displayed in the System Status page of the web-based manager. 
The serial number is specific to the FortiGate unit and does not change with firmware 
upgrades.

Displaying the FortiGate up time

1

Go to 

System > Status

.

The FortiGate up time displays the time in days, hours, and minutes since the 
FortiGate unit was last started.

Backing up system settings

You can back up system settings by downloading them to a text file on the 
management computer:

1

Go to 

System > Status

.

2

Select System Settings Backup.

3

Select Backup System Settings.

4

Type a name and location for the file.
The system settings file is backed up to the management computer.

5

Select Return to go back to the Status page.

Note: 

To configure the FortiGate unit for automatic attack definitions updates, see 

“Virus and 

attack definitions updates and registration” on page 71

. You can also manually initiate an attack 

definitions update by going to 

System > Update

 and selecting Update Now.

Содержание FortiGate 50R

















































































































































































































































Отзывы:

Нет отзывов