manualshive.com logo in svg

Fortinet FortiGate 50A, Руководство по установке, Страница: 15 / 52

Поделиться
Скачать
Fortinet FortiGate 50A Скачать руководство пользователя страница 15

Getting started 

Turning the FortiGate unit power on and off

FortiGate-50A Installation Guide

01-28008-0017-20050128

 15

Environmental specifications

• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing

Turning the FortiGate unit power on and off

To power on the FortiGate unit

1

Connect the AC adapter to the power connection on the back of the FortiGate-50A 
unit.

2

Connect the AC adapter to a power outlet.
The FortiGate-50A unit starts. The Power and Status LEDs are on. The Status LED 
flashes while the FortiGate-50A unit is starting and remains lit when the system is 
running.

To power off the FortiGate unit

Always shut down the FortiGate operating system properly before turning off the 
power switch. 

1

From the web-based manager, go to 

System > Maintenance > ShutDown

, select 

Shut Down and select Apply, or from the CLI, enter:

execute shutdown

2

Disconnect the power supply.

Table 1: FortiGate-50A LED indicators

LED

State

Description

Power

Green

The FortiGate unit is powered on.

Off

The FortiGate unit is powered off.

Status

Flashing 

Green

The FortiGate unit is starting up.

Green

The FortiGate unit is running normally.

Off

The FortiGate unit is powered off.

Internal 
External 
(Front)

Green 

The correct cable is in use, and the connected equipment has 

power.

Flashing 

Green

Network activity at this interface.

Off

No link established.

Internal 
External (Back)

Green

The correct cable is in use, and the connected equipment has 

power.

Flashing 

Amber

Network activity at this interface.

Off

No link established.

Содержание FortiGate 50A





















































Отзывы:

Нет отзывов