FortiGate-5001C security system
Front panel components
FortiGate-5001C Security System Guide
01-400-181221-20121130
7
http://docs.fortinet.com/
Base 1 and 2
Green
Base backplane interface 1 or 2 (base1 or base2) is
connected at 1 Gbps.
Flashing
Green
Network activity at base backplane interface 1 or 2
(base1 or base2).
OOS
(Out of Service)
Off
Normal operation.
Amber
A fault condition exists and the FortiGate-5001C blade
is out of service (OOS). This LED may also flash very
briefly during normal startup.
PWR (Power)
Green
The FortiGate-5001C board is powered on.
STA (Status)
Off
The FortiGate-5001C board is powered on.
Flashing
Green
The FortiGate-5001C is starting up. If this LED is
flashing at any time other than system startup, a fault
condition may exist.
ACC (Disk
activity)
Off or
Flashing
green
The ACC LED flashes green when the FortiGate-5001C
board accesses the FortiOS flash disk. The FortiOS
flash disk stores the current FortiOS firmware build and
configuration files. The system accesses the flash disk
when starting up, during a firmware upgrade, or when
an administrator is using the CLI or GUI to change the
FortiOS configuration. Under normal operating
conditions this LED flashes occasionally, but is mostly
off.
1 and 2
Green
The correct cable is connected to the port1 or port2
interface and the connected equipment has power.
Flashing
Green
Network activity at the interface.
Off
No link is established.
MGMT 1
and
MGMT 2
Link/Act
(Left
LED)
Solid
Green
Indicates the management interface (mgmt1 or mgmt2)
is connected with the correct cable and the attached
network device has power.
Blinking
Green
Indicates network traffic on this interface.
Off
No Link
Speed
(Right
LED)
Green
Connection at 1 Gbps.
Amber
Connection at 100 Mbps.
Off
Connection at 10 Mbps.
Table 2: FortiGate-5001C LEDs (Continued)
LED
State
Description
