Fortinet FortiGate 100 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 54

Fortinet FortiGate 100 Скачать руководство пользователя страница 14

14

01-28004-0019-20040830

Fortinet Inc.

Getting started

Connecting to the web-based manager

Use the following procedure to connect to the web-based manager for the first time.
Configuration changes made with the web-based manager are effective immediately
without resetting the firewall or interrupting service.

To connect to the web-based manager, you need:

• a computer with an ethernet connection,
• Internet Explorer version 4.0 or higher,
• a crossover cable or an ethernet hub and two ethernet cables.

To connect to the web-based manager

1

Set the IP address of the computer with an ethernet connection to the static IP
address 192.168.1.2 with a netmask of 255.255.255.0.

2

Using the crossover cable or the ethernet hub and cables, connect the internal
interface of the FortiGate unit to the computer ethernet connection.

3

Start Internet Explorer and browse to the address https://192.168.1.99. (remember to
include the “s” in https://).
The FortiGate login is displayed.

Figure 3: FortiGate login

4

Type admin in the Name field and select Login.

Connecting to the command line interface (CLI)

As an alternative to the web-based manager, you can install and configure the
FortiGate unit using the CLI. Configuration changes made with the CLI are effective
immediately without resetting the firewall or interrupting service.

Note:

You can use the web-based manager with recent versions of most popular web

browsers. The web-based manager is fully supported for Internet Explorer version 4.0 or higher.

«
...
12
13
14
15
16
...
»

Содержание FortiGate 100























































Отзывы:

Нет отзывов