Fortinet FortiDB 3000D, Быстрый старт

Страница: 5 / 24

3
4. Press the transceiver firmly into the cage socket with your thumb until it
clicks, indicating that it is latched .
5. Verify that the transceiver is latched: grasp the sides and trying to pull it
out
without lowering the extraction lever .
If you can remove the transceiver, it was not latched correctly, and could
become accidentally dislodged . Try again .
To remove SFP transceivers
1.
Disconnect the fiber optic cable from the transceiver connector .
2. To prevent dust from entering the optical bores, insert clean plugs .
3. To eject the transceiver, pull the extraction lever out and down .
Tip:
Instead of using your finger, try a small flat-head screwdriver .
4. Hold the sides of the transceiver and carefully pull it from the cage socket .
5. Replace the cap on the SFP cage socket .
6. Put the removed SFP transceiver into an anti-static bag .